EDS CS5-350 HDR belongs to the CS5-350 optoelectronic weld hole detection system, designed to detect marker holes indicating weld positions on moving metal strips.

Product Identification:

  • Manufacturer: Electronic Design System EDS S.r.l.

  • Main Model: CS5-350 HDR.

  • Product Family: CS5-350.

  • Product Type: Optoelectronic Weld Hole Detector.

  • Requested Configuration: CS5-350 HDR + CS5-HDT + RX cables.

  • Detection Technology: Optoelectronic.

  • Product Family Light Source: LED.

Requested System Configuration:

  • CS5-350 HDR: One set.

  • CS5-HDT: Included component according to the requested description.

  • RX cables: Included connection cables.

The exact cable quantities, cable lengths, connector types and manufacturer-approved packing list have not been independently verified.

Manufacturer-Confirmed Product Features:

  • Detection of holes marking weld lines on metal strip material.

  • Optoelectronic detection principle.

  • High immunity to ambient light.

  • Manufacturer-stated compliance with EMC requirements.

These features are confirmed for the CS5-350 product family on the official EDS website.

 
Electronic Design Systems

 

Distributor-Published Reference Specifications for CS5-350:

  • Light Source: LED technology.

  • Minimum Detectable Hole Size: 3 mm.

  • Material Speed: 5–2,000 m/min.

  • Detection Response: 5 ms.

  • Detection Width: 350 mm.

  • Optional Detection Width: 500 mm.

  • Maximum Transmitter-to-Receiver Gap: 2 m.

  • Optical Alignment: Indicator LED.

  • Ambient Light Immunity: Frequency modulation.

  • Relay Output: Maximum 250 VAC, 5 A.

  • Optocoupled Output: Maximum 70 V, 50 mA.

  • Adjustable Output Signal Duration: 40–200 ms.

  • Reference Dimensions: 505 × 65 × 170 mm.

  • Ambient Temperature: -30°C to +65°C.

  • Reference Weight: 3.5 kg per unit.

  • Protection Rating: IP65.

  • Reference Power Supply: 230 VAC, 20 VA.

These values are published by a distributor for the CS5-350 series. They have not been verified against an official datasheet for the exact requested HDR/HDT assembly.

 
eurododo.com

 

Additional Commercial Reference:

A separate EDS commercial catalogue describes the CS5-350 system as capable of detecting 5mm holes at material speeds exceeding 1,200m/min.

This differs from the 3mm minimum hole size and 2,000m/min maximum speed published by the Vietnamese distributor. The underlying test conditions and configuration differences remain unverified.

 
yursat.com.tr

 

Operating Principle:

The system uses an optical transmitter and receiver arrangement positioned around the moving metal strip.

When a weld marker hole passes through the detection area, the optical receiver detects the transmitted light signal.

The detection event can then be used by a connected industrial control system for application-specific monitoring, synchronization or process control.

Typical Industrial Applications:

  • Steel strip processing lines.

  • Weld marker detection in continuous production.

  • Metal coil joining position monitoring.

  • Metal strip cutting and processing systems.

  • Industrial metal finishing lines.

  • Automated equipment requiring weld position identification.

Verification Scope:

The CS5-350 product family and its weld marker hole detection function have been confirmed through the manufacturer's official website.

The complete HDR + HDT + RX cable configuration is based on the supplied product description. Exact manufacturer documentation for the individual assembly components has not yet been obtained.

Exact-Configuration Details Requiring Verification:

  • CS5-350 HDR hardware version.

  • Exact CS5-HDT part number and quantity.

  • RX cable lengths and connector types.

  • Operating supply voltage.

  • Detection output configuration.

  • Detection width and hole size requirements.

  • Transmitter-to-receiver installation distance.

  • Mechanical mounting dimensions.

  • Environmental protection rating for the supplied configuration.

  • Complete manufacturer packing list.

Replacement Considerations:

Verify the original equipment nameplates, wiring diagrams, optical alignment requirements, power supply and output signal compatibility before replacement.

Different CS5-350 configurations must not be assumed directly interchangeable without manufacturer confirmation.

Safety Notice:

Installation and maintenance must be carried out by qualified personnel. Isolate electrical power and prevent unintended movement of the production line before performing mechanical or electrical work.