Elektrogas VMR6-60N.C – 2-Inch, 6-Bar Fast-Opening Safety Gas Solenoid Valve
Price: Contact
Brand: Delta Elektrogas
Category: Thiết bị điều khiển van công nghiệp
Supplier: AnhNghiSon
Origin: Italy
Product Identification
-
Manufacturer: Delta Elektrogas.
-
Model: VMR6-60N.C.
-
Product Family: VMR / VMR60.
-
Product Type: Safety Solenoid Valve for Gas.
-
Operating Principle: Normally Closed.
-
Opening Action: Fast Opening.
-
Closing Action: Fast Closing.
-
Reset Type: Automatic Reset.
Manufacturer Ordering Code Interpretation
-
VMR: Fast-opening and fast-closing safety gas solenoid valve.
-
6: Nominal 2-inch valve size.
-
-60: Maximum operating pressure of 6 bar.
-
N: US-market version with NPT/ANSI connections and FM-approved configuration.
-
.C: 24V AC/DC supply voltage.
The interpretation is based on the manufacturer's VMR technical sheet, ordering information section.
Technical Specifications
-
Nominal Connection Size: 2 inches.
-
Maximum Operating Pressure: 6 bar.
-
Solenoid Supply Voltage: 24V AC/DC.
-
Voltage Tolerance: -15% to +10%.
-
Opening Time: Less than 1 second.
-
Closing Time: Less than 1 second.
-
Standard Enclosure Protection: IP54.
-
Ambient and Media Temperature: -15°C to +60°C.
-
Duty Rating: 100% ED continuous service.
-
Compatible Gas Families: Air and non-aggressive gases, families 1, 2 and 3 according to EN 437.
-
Valve Body Material: Die-cast aluminum alloy.
-
Sealing Material: Gas-compatible NBR-based rubber.
Mechanical Reference Data – 2-Inch VMR
-
Dimension A: 106 mm.
-
Dimension B: 156 mm.
-
Dimension C: 195 mm.
-
Dimension D: 234 mm.
-
Approximate Weight: 6 kg.
These dimensions are published for the 2-inch aluminum-body VMR configuration. The exact N-version installation drawing should be checked before mechanical replacement.
Operating Principle
The solenoid valve remains closed when the electrical supply is disconnected. When the coil is energized, the magnetic force opens the valve against the spring and gas pressure.
When electrical power is removed, the spring closes the valve rapidly, interrupting the gas flow.
General Features
-
Normally closed, electrically operated design.
-
Fast opening and fast closing.
-
Automatic closing following power loss.
-
Suitable for continuous-duty operation.
-
Designed for integration into industrial gas trains.
-
Compatible with appropriate burner management and gas safety control systems.
Standards and Approvals
-
Manufacturer-stated EN 161 compliance for the VMR valve family.
-
FM-approved US-market variant according to the ordering code description.
-
Actual product approval markings and certification documentation should be verified for the supplied configuration.
Typical Applications
-
Industrial gas burners.
-
Gas combustion systems.
-
Industrial kilns and furnaces.
-
Gas-fired heating equipment.
-
Industrial gas train assemblies.
-
Automated gas shut-off systems.
Configuration Verification Before Ordering
-
Confirm the exact VMR6-60N.C product designation.
-
Verify the 24V AC/DC coil rating.
-
Confirm the 2-inch NPT connection.
-
Verify the 6-bar maximum operating pressure.
-
Confirm applicable FM certification.
-
Check electrical terminal configuration.
-
Verify flow requirements and allowable pressure drop.
-
Confirm compatibility with the existing burner safety control system.
Safety and Installation Notice
Gas safety valves must be selected, installed and commissioned by qualified personnel. The gas system must be isolated before maintenance, and leak-tightness testing must be performed according to the manufacturer's instructions and applicable regulations.

