IMO REDMOD20 – 24VDC 20A Redundant Power Supply Module
Price: Contact
Brand: IMO Vietnam
Category: Bộ nguồn công nghiệp
Supplier: AnhNghiSon
Origin: UK
Product Identification
-
Manufacturer: IMO Precision Controls.
-
Model: REDMOD20.
-
Product Type: Redundant Power Supply Module.
-
Nominal System Voltage: 24 VDC.
-
Input Configuration: Dual input.
-
Installation: DIN rail.
Input Specifications
-
Rated Input Voltage: 19–29 VDC.
-
Number of Inputs: 2.
-
Rated Input Current: 20 A continuous.
Output Specifications
-
Rated Output Current: 20 A.
-
Maximum Output Current: 30 A for 5 seconds.
-
Output Voltage Drop: 0.25 V.
-
Maximum Reverse Voltage: 30 V.
Status Monitoring and Protection
-
Green LED: Input DC OK indication.
-
Relay Contacts: DC OK monitoring.
-
Integrated Decoupling Diodes.
-
DC OK Contact Rating: 30 VDC / 1 A, resistive load.
-
Power Ready OK: Input above 20V (±5%) and below 30V (±5%).
-
Power Ready Fail: Input below 20V (±5%) or above 30V (±5%).
Electrical Insulation
-
Isolation Voltage: 100 VDC.
-
Isolation Resistance: 100 MΩ at 500 VDC.
Environmental and Mechanical Specifications
-
Ambient Operating Temperature: -40°C to +80°C.
-
Storage Temperature: -40°C to +85°C.
-
Relative Humidity: 5–95% RH.
-
Cooling Method: Natural convection.
-
Protection Rating: IP20.
-
Enclosure Material: Metal.
-
Dimensions: H125 × W32 × D100 mm.
-
Weight: 500 g.
-
Pollution Degree: 2.
-
MTBF: 792,000 hours.
Installation Requirements
-
DIN Rail: TS35/7.5 or TS35/15.
-
Wire Size: AWG 24–10 / 0.2–4 mm².
-
Copper Conductors: 60/75°C rated.
-
Recommended Wire Stripping Length: 8 mm.
-
Recommended Ventilation Clearance: 25 mm on all sides.
Input Terminal Assignment
-
Terminal 1: +Vin1.
-
Terminal 2: -Vin1.
-
Terminal 3: +Vin2.
-
Terminal 4: -Vin2.
Output and Signal Terminal Assignment
-
Terminals 1–2: Alarm1 DC OK.
-
Terminals 3–4: Alarm2 DC OK.
-
Terminals 5–6: FG.
-
Terminal 7: +Vout.
-
Terminal 8: -Vout.
The input and output terminal blocks have separate numbering systems. Always follow the manufacturer's wiring diagram.
Typical Applications
-
1+1 redundant power supply arrangements.
-
1+N industrial power redundancy systems.
-
PLC and HMI power continuity.
-
Industrial control panel redundancy.
-
Sensor and automation equipment power distribution.
RPM20 Replacement Considerations
The supplied product information identifies REDMOD20 as the replacement for the discontinued RPM20. However, a manufacturer-issued direct replacement or pin-compatibility statement has not been independently verified.
Before replacing RPM20, verify electrical ratings, terminal assignments, physical dimensions, mounting requirements and power redundancy system configuration.

