NI cDAQ-9185 – 4-SLOT TSN-ENABLED ETHERNET COMPACTDAQ CHASSIS

NI cDAQ-9185 (Part Number 785064-01) is a modular Ethernet CompactDAQ chassis designed for distributed measurement, industrial monitoring and automated testing.

Key Technical Features:

  • Four slots for compatible NI C Series I/O modules.

  • Two integrated 10/100/1000 Mbps Ethernet ports.

  • Internal network switch supporting daisy-chain connections.

  • TSN synchronization based on IEEE 802.1AS.

  • Four 32-bit general-purpose counters/timers.

  • Hardware triggering and PFI signal connectivity.

  • 9–30 VDC input voltage range.

  • Maximum power consumption of 16 W.

  • Extended operating temperature range from −40°C to +70°C.

  • IP40 protection rating.

  • Compatible with NI-DAQmx and LabVIEW.

  • Standard configuration without conformal coating.

Applications: Industrial data acquisition, vibration monitoring, temperature measurement, strain measurement, machine condition monitoring, automated product testing and research and development.

Important Notice: The cDAQ-9185 requires compatible NI C Series modules for physical measurements. Measurement channels, signal types and sampling rates depend on the installed modules.

Supplier: AnhNghiSon – Technical consultation and quotations for NI cDAQ-9185 Part Number 785064-01 in Vietnam.

Parameter

Specification

Manufacturer

NI (National Instruments)

Model

cDAQ-9185

Part Number

785064-01

Device Type

Ethernet CompactDAQ Chassis

Number of Slots

4

Compatible Modules

NI C Series

Ethernet Ports

2

Ethernet Speed

10/100/1000 Mbps

Integrated Network Switch

Yes

Maximum Ethernet Cable Length

100 m per segment

Maximum Network Hops

15, default configuration

Network Protocols

TCP/IP, UDP

TSN Synchronization Standard

IEEE 802.1AS

Network Synchronization Accuracy

Less than 1 µs, system-dependent

Optimized Synchronization Accuracy

Less than 100 ns, under specified conditions

General-Purpose Counters/Timers

4

Counter Resolution

32 bits

Analog Input FIFO

127 samples per slot

Analog Input Timing Accuracy

50 ppm of sample rate

Internal Base Clocks

80 MHz, 20 MHz, 13.1072 MHz, 12.8 MHz, 10 MHz, 100 kHz

Chassis PFI Connector

SMB

Input Voltage Range

9–30 VDC

Maximum Power Consumption

16 W

Power Input Connector

2-position, 3.5 mm pitch Mini-COMBICON

Included Power Adapter

12 VDC, 2 A

Operating Temperature

−40°C to +70°C

Storage Temperature

−40°C to +85°C

Operating Humidity

10–90% RH, non-condensing

Ingress Protection

IP40

Dimensions

178.1 × 88.1 × 64.1 mm

Unloaded Weight

660.5 g

Conformal Coating

No

Product Status

Active