Rotary Cam Switch GGSW100 and GGSW120 Leonard Engineering GmbH

Leonard rotary cam switches GGSW100 and GGSW120  are cased in housings of gray cast iron and fitted out with mechanic switching elements. The technical data of all available switching elements The rotary cam switches GGSW100 and GGSW120 are normally available with 6 and 12 switching elements. The cam shaft (spindle) comes out on both sides of the housing so that several switches can be coupled together. The second end of the shaft, which is normally unused, is protected by a safety cover. The cam shaft is mounted in two deep groove ball bearings and maintenance-free.

To actuate  the individua l switching elements the cam shaft is fitted with cam disk sets in a pitch of 20 mm resp. 30 mm . Each cam disk set consists of the components . The infinitely adjustable cam disk sets of both rotary cam switch types, which run almost entirely free from unbalance by virtue of their special design, are individually tensioned by disc springs. This tension is such that all cam disk sets can be adjusted when the clamp nut is slackened. After setting all the cam disk sets the complete adjustment can be checked on start up for trial operation. Only after all switching adjustments have been tested, the clamp nut is tightened against the disc spring. All cam disk sets are positively located in the position 

GGSW100-06
GGSW120-06 
GGSW100-12
GGSW120-12