Baumüller SET-BM4424-SL1-22642-S01-0315-7012-E80 is an industrial servo inverter set from the b maXX 4400 product family.

Manufacturer-Verified BM4424 Base-Drive Specifications:

• Manufacturer: Baumüller

• Product Family: b maXX 4400

• Base Drive: BM4424

• Product Type: Industrial Servo Inverter / Servo Drive

• Frame Size: 2

• Rated Output Current: 15 A

• Maximum Output Current: 30 A

• Typical Motor Rating: 6.8 kW

• Overload Factor: 2

• Air-Cooled Reference Dimensions, W × H × D: 106 × 428 × 340 mm

• Water-Cooled Reference Dimensions, W × H × D: 106 × 428 × 320 mm

The actual cooling configuration of the requested SET has not been confirmed.

Additional BM4424 Universal Unit Electrical Data:

• Rated Input Apparent Power: 11.8 kVA

• Rated Input Current: 17 A

• Maximum Input Current: 31.8 A

• Nominal DC-Link Voltage: 540 VDC

• Internal DC-Link Capacitance: 705 µF

• Internal DC-Link Discharge Time: 510 seconds

These electrical values are published for the BM4424 Universal Unit. They must not be treated as verified characteristics of the exact SL1-22642 SET without configuration confirmation.

Commercial Product Identification:

• Requested Model: SET-BM4424-SL1-22642-S01-0315-7012-E80

• Distributor-Reported Article Number: 06477640

• Alternative Spelling Found in a Commercial Listing: SET-BM4424-SI1-22642-S01-0315-7012-E80

• Similar but Different Ordering Code: SET-BM4424-SI1-21642-S01-0315-7012-E80

• Article Number of the Different Ordering Code: 06477639

Exact-Configuration Details Requiring Verification:

• Whether SL1 and SI1 represent different hardware configurations or a transcription discrepancy.

• Meaning of the 22642, S01, 0315, 7012 and E80 ordering segments.

• Actual components included in the SET.

• Cooling arrangement.

• Installed encoder and industrial communication interfaces.

• Integrated safety functions.

• Hardware and firmware revisions.

• Supplied drive parameter datasets.

• Compatibility with other BM4424 variants.

Important: Article Nos. 06477640 and 06477639 must not be considered interchangeable without confirmation from Baumüller.

Safety Notice: Hazardous DC-link voltage may remain after power disconnection. Installation and servicing must be performed by qualified personnel following the manufacturer's isolation and voltage verification procedures.