Baumüller DA1-180LO54I-17-5-DOB-1-NT9-R9R-AA-O+AH1+QS1 is a three-phase AC asynchronous motor from the DA1 product family.

Product Identification:

  • Manufacturer: Baumüller

  • Product Family: DA1

  • Full Model: DA1-180LO54I-17-5-DOB-1-NT9-R9R-AA-O+AH1+QS1

  • Manufacturer Catalogue Base Designation: DA1-180LO54A/I-17-5

  • Product Type: Three-Phase Asynchronous Motor

  • Distributor-Reported Producer Number: 00484587

  • Distributor-Reported Item Number: 542535

  • Serial Number Referenced in a Commercial Listing: 92000168

Manufacturer Technical Data for DA1-180LO54A/I-17-5, based on a converter system supplied from three-phase 400VAC mains:

  • Rated Output Power PN: 85 kW

  • Rated Speed nN: 1,750 rpm

  • Rated Torque MN: 464 Nm

  • Rated Current IN: 192 A

  • Rated Motor Voltage UN: 330 V

  • Field-Weakening Transition Speed n1: 3,500 rpm

  • Maximum Speed nmax: 4,300 rpm

  • Power Factor cosφ: 0.82

  • Magnetizing Current Iμ: 78 A

  • Rated Efficiency ηN: 0.936 (93.6%)

  • Rated Electrical Frequency fN: 59.1 Hz

  • Maximum Standstill Torque M0,max: 956 Nm

  • Rotor Moment of Inertia J: 0.676 kg·m²

  • Reference Motor Weight: 425 kg

  • Protection Class for DA1-180..54 A/I: IP54

  • Cooling Category: Surface-cooled

Verification Scope:

These specifications are taken from the official Baumüller DA1-180LO54A/I-17-5 technical table. The base designation matches the principal motor configuration of the requested ordering code, but the complete DOB-1-NT9-R9R-AA-O+AH1+QS1 options have not been independently verified.

Voltage Clarification:

The 400VAC value refers to the mains supply of the converter system used for the manufacturer's published operating conditions. The 330V value is the motor's rated voltage at the specified operating point. These values must not be treated as interchangeable or as permission for direct mains connection.

Exact-Configuration Details Requiring Verification:

  • Mounting arrangement and flange dimensions.

  • Shaft dimensions and installation length.

  • Encoder or speed-feedback configuration.

  • Temperature sensor arrangement.

  • Brake and mechanical options.

  • Terminal box and connector configuration.

  • Actual cooling arrangement.

  • Installed motor weight.

  • Full interpretation of DOB, NT9, R9R, AA, O, AH1 and QS1.

  • Compatibility with the existing frequency converter.

Replacement Considerations:

Verify Producer No. 00484587, the motor nameplate, mounting drawing, electrical ratings, load characteristics, feedback configuration and converter parameters before replacement.

The 85kW, 1,750rpm motor must not be assumed directly interchangeable with the 50kW, 1,000rpm DA1-180LO54I-10-5 version, even though both belong to the same general frame family.

Safety Notice: High-power motor installation and maintenance must be performed by qualified personnel. Isolate the electrical supply, prevent unintended startup and verify cooling-system operation before commissioning.