Baumüller DSD2-100LO64W-30-54-ABA-KNT-K-AN-O-110 is a high-dynamic three-phase synchronous servo motor from the Baumüller DSD2 product family.

Product Identification:

  • Manufacturer: Baumüller Nürnberg GmbH.

  • Product Family: DSD2-100.

  • Full Model: DSD2-100LO64W-30-54-ABA-KNT-K-AN-O-110.

  • Manufacturer Catalogue Base Designation: DSD2-100LO64W-30-54.

  • Product Type: Three-Phase Synchronous Servo Motor.

  • Commercial Item Number: 528592E.

  • Reference Producer Number: 00449678.

  • Reference Serial Number: 21713769, as listed in a commercial source.

Manufacturer Technical Data for DSD2-100LO64W-30-54:

  • Rated Output Power PN: 37 kW.

  • Rated Speed nN: 3,000 rpm.

  • Rated Torque MN: 120 Nm.

  • Rated Current IN: 88 A.

  • Standstill Torque M0: 130 Nm.

  • Standstill Current I0: 95 A.

  • Maximum Standstill Torque M0,max: 210 Nm.

  • Maximum Current I0,max: 180 A.

  • Cold Voltage Constant kE: 91.9 V/1,000 rpm.

  • Rated Electrical Frequency fN: 200 Hz.

  • Rotor Moment of Inertia J: 88 kg·cm².

  • Reference Motor Weight: 62 kg.

  • Cooling Method: Water-cooled.

  • Protection Class: IP54 according to the base type designation.

The listed electrical and mechanical ratings are confirmed in the manufacturer's DSD2-100 water-cooled motor technical tables.

 
baumueller.com+1

 

Published Operating Conditions:

The published ratings are based on converter operation with three-phase 400VAC mains and an uncontrolled supply unit.

Rated torque and power values depend on the manufacturer's specified thermal, installation and cooling conditions.

The 400VAC value describes the converter supply condition and must not be interpreted as an instruction to connect the servo motor directly to the mains.

General DSD2 Motor Features:

  • Three-phase permanent-magnet synchronous motor.

  • High-dynamic servo drive performance.

  • Low rotor inertia for rapid acceleration and deceleration.

  • High torque density.

  • Precise speed, position and torque control.

  • Water cooling for the 64W configuration.

  • Optional encoder and feedback arrangements.

  • Optional holding brake configurations across the product family.

  • Compatibility with suitable industrial servo drives.

Optional components must not be assumed to be installed on the exact requested configuration without confirmation.

Verification Scope:

The manufacturer-confirmed technical values apply to the DSD2-100LO64W-30-54 base motor.

The complete ordering code ABA-KNT-K-AN-O-110 and reference producer number 00449678 have been identified in commercial listings.

The individual ordering suffixes have not been independently verified against an exact motor configuration sheet or manufacturer serial-number record.

Exact-Configuration Details Requiring Verification:

  • Encoder type and position-feedback interface.

  • Holding brake availability and specifications.

  • Shaft dimensions and keyway configuration.

  • Mounting flange and installation dimensions.

  • Main power connector type.

  • Feedback connector type.

  • Thermal protection sensor configuration.

  • Cooling water flow rate, pressure and temperature requirements.

  • Actual weight and overall dimensions.

  • Compatibility with the existing servo drive.

  • Full interpretation of ABA, KNT, K, AN, O and 110.

Replacement Considerations:

Verify the original motor nameplate, full ordering designation, mechanical drawings, feedback interface, cooling requirements and servo drive parameters before replacement.

Different DSD2-100 motor configurations must not be assumed to be directly interchangeable.

Safety Notice:

Installation, wiring and maintenance must be performed by qualified personnel. Disconnect the power supply, prevent unintended startup, secure mechanical loads and ensure that the cooling system meets manufacturer requirements before operation.