Baumüller DS 45 M 35 is an industrial AC synchronous servo motor from the DS family.

Commercial Product Identification:

• Manufacturer: Baumüller

• Product Family: DS

• Requested Model: DS 45 M 35

• Product Type: Three-Phase Synchronous Servo Motor

• Distributor-Reported Producer Number: 00301398

• Distributor-Reported Item Number: 529108

• Power Reported by One ANS Supplier Listing: 0.7 kW

• Power Reported by a German Equipment Supplier: 0.5 kW

The reported power ratings are inconsistent. An exact manufacturer nameplate or factory datasheet is required to establish the correct rated power of Article No. 00301398.

Manufacturer Technical Data for Historical DS 45 M – 3,000rpm:

• Rated Speed nN: 3,000 rpm

• Standstill Torque M0: 1.7 Nm

• Rated Torque MN: 1.6 Nm

• S3-40% Torque: 2.4 Nm

• Standstill Current I0: 1.3 A

• Rated Current IN: 1.3 A

• S3-40% Current: 1.9 A

• Voltage Constant kE: 82.3 V/1,000 rpm

• Torque Constant kT: 1.36 Nm/A

• Rotor Moment of Inertia J: 2.1 kg·cm²

• Reference Motor Weight: 5.9 kg

Verification Scope: These values are published for the historical DS 45 M 3,000rpm motor platform. Full equivalence with the requested DS 45 M 35 ordering designation requires confirmation from the motor nameplate.

Exact-Configuration Details Requiring Verification:

• Exact manufacturer-rated motor power.

• Nameplate voltage and current ratings.

• Maximum permissible speed.

• Maximum dynamic torque.

• Encoder or resolver configuration.

• Holding brake presence.

• IP protection class.

• Cooling arrangement.

• Shaft, flange and overall dimensions.

• Electrical connector types.

• Hardware and accessory configuration.

• Compatibility with the existing servo drive.

Replacement Considerations: Confirm Article No. 00301398, the original motor nameplate, mounting drawing, electrical ratings and feedback interfaces. DS 45 M 35 must not be assumed interchangeable with DS 45 L35, DSG 45 M35 or newer DSC motors.

Safety Notice: Servo motors may produce unexpected motion when drive parameters or feedback configurations are incorrect. Installation and servicing must be performed by qualified personnel.