Contact consultant

Hotline

support@ansgroup.asia

0911472255

Product information
Specifications

Digital Control Unit PD3-5024-4-PI(A) CCS Vietnam

This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 46 W.

Connection with the HLV3/HLV2-series Spot Lights is also available.

This Control Unit operates on a 100 to 240 VAC input and measures 197 x 82.6 x 120 mm (width x depth x height). External control through Parallel communications.

Product Details

Dimensions W 197 mm x D 82.6 mm x H 120 mm
Applicable Light Unit (output ratings) Light Units with 24 VDC input, HLV3/HLV2 series (Spot Light)
Total for 4 channels: 46 W
Number of channels 4 channels
Lighting method Constant/Strobe lighting
Drive method 24V LIGHT connectors: Constant-voltage system,
HLV LIGHT connectors: Constant-current system
Intensity control method 24V LIGHT connectors: PWM control and lighting time control,
HLV LIGHT connectors: Variable-current control
Intensity control Manual: 256-step using the front setting switch
External: 8-bit input (B0 to B7), write pulse (BRTWR), and channel selection (CHSEL0 to CHSEL2)
PWM frequency 125kHz
Input voltage 100 to 240 VAC (+10% -15%)
Frequency 50/60 Hz
Power consumption 70 VA
Output voltage 24VDC
Output current Total for 4 channels: 1.91 A
Inrush current 15 A (at 100 VAC), 30 A (at 200 VAC) from a cold start
Error detection display Digital display on the front-panel;
OCP: Overcurrent error, EFN: Fan Stop Error,
and EID: ID error (HLV3/HLV2-series Spot Lights only)
Error detection output NPN transister output to the External control connector pins between 19(OC) and 20(OE); open for normal operation, closed for overcurrent detection.
Over current protection Yes
Output connector SMP-03V-BC x 8
External control connector Trigger input: MIL connector (MIL-C-83503 compliant), 10 pins
For setting the light intensity/mode: MIL connector (MIL-C-83503 compliant), 20 pins
Conformed standards CE, UKCA、RoHS
Operating temperature and humidity Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation)
Storage temperature and humidity Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation)
Cooling method Forced cooling
Weight 1,200 g
Material Aluminium, ABS
Accessories 2m long 3-pin power cord with ground terminal x1
Base Brackets x1 set
Instruction Guide x1