Baumüller BM5323-SG04-0100-0106-00-01 is a compact dual-axis servo drive from the b maXX 5300 product family.

Manufacturer-Verified BM5323 Technical Specifications:

• Manufacturer: Baumüller

• Product Family: b maXX 5300

• Requested Model: BM5323-SG04-0100-0106-00-01

• Product Type: Dual-Axis Servo Drive

• Number of Controlled Axes: 2

• Frame Size: 2

• Standard Rated Output Current: 2 × 3 A

• Maximum Output Current: 2 × 9 A

• Standard Typical Motor Rating: 2 × 1.6 kW

• Standard Overload Factor: 3

• EN 61800 Load-Cycle Rated Current: 2 × 4.5 A

• EN 61800 Load-Cycle Maximum Current: 2 × 9 A

• EN 61800 Typical Motor Rating: 2 × 2.4 kW

• EN 61800 Load-Cycle Overload Factor: 2

• External Electronics Supply: 24 VDC

• Switching Frequencies: 4 / 8 kHz

• Air-Cooled Dimensions, W × H × D: 50 × 395 × 280 mm

• Coldplate Dimensions, W × H × D: 50 × 395 × 210 mm

• Published Product-Family Certifications: CE, cUL

Dimensions exclude mounting brackets.

Distributor-Reported Nameplate Data for the -#01 Variant:

• Nameplate Model: BM5323-SG04-0100-0106-00-01-#01

• DC-Link Input Voltage: 640 VDC, with 760 VDC shown in parentheses

• Motor Outputs: Two three-phase output channels

• Output Voltage: 0–450 VAC, with 500 VAC shown in parentheses

• Output Current: 3 A per axis, with 2.5 A shown in parentheses

• Output Frequency Range: 0–800 Hz

• Operating Mode Marking: KB 300%

The above nameplate information is reported for the closely matching -#01 variant. It has not been independently confirmed for the requested code without that suffix.

Exact Configuration Details Requiring Verification:

• Hardware and firmware revisions.

• Actual cooling configuration.

• Communication and encoder interfaces.

• Installed safety module.

• Drive parameter datasets.

• Compatibility with existing motors and automation equipment.

Important: The 2 × 1.6kW and 2 × 2.4kW figures represent typical motor ratings per axis under different load conditions. They should not be treated as guaranteed combined module output power.

Safety Notice: The DC link may retain hazardous electrical energy after power disconnection. Installation and maintenance must follow Baumüller's isolation and voltage verification procedures.