Baumüller BM5325-SG04-0100-0128-00-2116-E80-#01 is a dual-axis industrial servo drive belonging to the b maXX 5300 product family.

Manufacturer-Verified BM5325 Base-Unit Specifications:

• Manufacturer: Baumüller

• Product Family: b maXX 5300

• Base Drive: BM5325

• Product Type: Dual-Axis Servo Drive / Servo Inverter

• Number of Controlled Axes: 2

• Frame Size: 2

• Standard Rated Output Current: 2 × 6 A

• Maximum Output Current: 2 × 18 A

• Standard Typical Motor Rating: 2 × 3.2 kW

• Standard Overload Factor: 3

• EN 61800 Load-Cycle Rated Current: 2 × 8.5 A

• EN 61800 Load-Cycle Maximum Current: 2 × 18 A

• EN 61800 Typical Motor Rating: 2 × 4.6 kW

• EN 61800 Load-Cycle Overload Factor: 2.1

• Published System Supply Voltage Range: 207–528 VAC

• Supply Frequency: 50/60 Hz

• External Electronics Supply: 24 VDC

• Switching Frequencies: 4 / 8 kHz

• Air-Cooled Dimensions, W × H × D: 50 × 395 × 280 mm

• Coldplate Dimensions, W × H × D: 50 × 395 × 210 mm

• Published Product-Family Certifications: CE, cUL

Dimensions exclude mounting brackets. The system supply voltage range does not establish the exact direct-input connection arrangement of this axis module.

Exact-Model Commercial Identification:

• Ordering Code: BM5325-SG04-0100-0128-00-2116-E80-#01

• Manufacturer Part Number Reported by KCCO: 06501634

• Product Classification: Dual-Axis Servo Drive

Configuration Details Requiring Verification:

• Full interpretation of the SG04, 0100, 0128, 2116, E80 and #01 suffixes.

• Installed encoder and industrial communication interfaces.

• Integrated safety functions.

• Actual cooling configuration.

• Hardware and firmware revisions.

• Drive parameter datasets.

• Included connectors and accessories.

• Compatibility with the existing machine control system.

Important: The rated currents and typical motor powers are specified per axis. The standard and EN 61800 load-cycle ratings represent different operating conditions and must not be combined.

Safety Notice: Hazardous DC-link voltage may remain after power disconnection. Qualified personnel must follow the manufacturer's electrical isolation and voltage verification procedures.