Victron Energy PIN242121100 is a 24VDC to 230VAC pure sine wave inverter belonging to the Phoenix Inverter VE.Direct product family.

The inverter converts stored DC energy from a 24V battery system into AC electricity suitable for compatible electrical loads.

Its pure sine wave output, VE.Direct communication interface and ECO mode make it suitable for standalone electrical systems requiring efficient power conversion and monitoring.

The unit includes protective functions against electrical overload, short circuit, excessive temperature and abnormal battery voltage.

Technical Specifications:

• Manufacturer: Victron Energy

• Product Code: PIN242121100

• Model: Phoenix Inverter 24/1200 230V VE.Direct IEC

• Inverter Type: Pure Sine Wave DC/AC Inverter

• Nominal Battery Voltage: 24VDC

• DC Input Voltage Range: 18.4–34VDC

• Nominal AC Output Voltage: 230VAC

• Output Frequency: 50Hz or 60Hz, configurable

• Nominal Apparent Power: 1200VA

• Continuous Real Output Power at 25°C: 1000W, corresponding product version

• Published Peak Power: 2200W, corresponding product version

• Maximum Efficiency: 91%

• Output Waveform: Pure Sine Wave

• Communication Interface: VE.Direct

• Energy-Saving Function: ECO Mode

• AC Outlet Type: IEC

• Ingress Protection: IP21

• Nominal Dimensions: 117 × 232 × 327 mm

• Weight: 7.4 kg

• Protection Functions: Overload, short circuit, overtemperature, high battery voltage and low battery voltage

• Typical Applications: Off-grid solar, marine power, battery backup and standalone AC supply

Important Technical Notes:

The 1200VA rating is apparent power and should not be interpreted as a continuous 1200W real-power rating for every load.

This model is a standalone inverter without an integrated battery charger or grid-synchronization function.

DC cabling, fuse protection and battery capacity must be selected according to the installation manual.

The manufacturer has introduced newer hardware revisions with different product codes. Electrical specifications should be checked against the exact hardware version before replacement or installation.